CLUTTER_ACTOR_SET_FLAGS()

#define CLUTTER_ACTOR_SET_FLAGS(a,f)    (((ClutterActor*)(a))->flags |= (f))

Sets the given flags on a ClutterActor

CLUTTER_ACTOR_UNSET_FLAGS()

#define CLUTTER_ACTOR_UNSET_FLAGS(a,f)  (((ClutterActor*)(a))->flags &= ~(f))

Unsets the given flags on a ClutterActor

CLUTTER_ACTOR_IS_MAPPED()

#define CLUTTER_ACTOR_IS_MAPPED(e)      (((ClutterActor*)(e))->flags & CLUTTER_ACTOR_MAPPED)

Evaluates to TRUE if the CLUTTER_ACTOR_MAPPED flag is set.

Since 0.2

CLUTTER_ACTOR_IS_REALIZED()

#define CLUTTER_ACTOR_IS_REALIZED(e)    (((ClutterActor*)(e))->flags & CLUTTER_ACTOR_REALIZED)

Evaluates to TRUE if the CLUTTER_ACTOR_REALIZED flag is set.

Since 0.2

CLUTTER_ACTOR_IS_VISIBLE()

#define CLUTTER_ACTOR_IS_VISIBLE(e)     (CLUTTER_ACTOR_IS_MAPPED (e) && CLUTTER_ACTOR_IS_REALIZED (e))

Evaluates to TRUE if the actor is both realized and mapped.

Since 0.2

CLUTTER_ACTOR_IS_REACTIVE()

#define CLUTTER_ACTOR_IS_REACTIVE(e)    (((ClutterActor*)(e))->flags & CLUTTER_ACTOR_REACTIVE)

Evaluates to TRUE if the CLUTTER_ACTOR_REACTIVE flag is set.

Since 0.6

ClutterActorBox

typedef struct {
  ClutterUnit x1;
  ClutterUnit y1;
  ClutterUnit x2;
  ClutterUnit y2;
} ClutterActorBox;

Bounding box of an actor. The coordinates of the top left and right bottom corners of an actor. The coordinates of the two points are expressed in ClutterUnits, that is are device-independent. If you want to obtain the box dimensions in pixels, use clutter_actor_get_geometry().

enum ClutterActorFlags

typedef enum
{
  CLUTTER_ACTOR_MAPPED   = 1 << 1,
  CLUTTER_ACTOR_REALIZED = 1 << 2,
  CLUTTER_ACTOR_REACTIVE = 1 << 3
} ClutterActorFlags;

Flags used to signal the state of an actor.

enum ClutterRequestMode

typedef enum {
  CLUTTER_REQUEST_HEIGHT_FOR_WIDTH,
  CLUTTER_REQUEST_WIDTH_FOR_HEIGHT
} ClutterRequestMode;

Specifies the type of requests for a ClutterActor.

Since 0.8

ClutterGeometry

typedef struct {
  gint   x;
  gint   y;
  guint  width;
  guint  height;
} ClutterGeometry;

The rectangle containing an actor's bounding box, measured in pixels.

CLUTTER_CALLBACK()

#define CLUTTER_CALLBACK(f)        ((ClutterCallback) (f))

Convenience macro to cast a function to ClutterCallback

ClutterCallback ()

void                (*ClutterCallback)                  (ClutterActor *actor,
                                                         gpointer data);

Generic callback

ClutterActor

typedef struct {
  guint32 flags;
} ClutterActor;

Base class for actors.

ClutterActorClass

typedef struct {
  void (* show)                 (ClutterActor          *actor);
  void (* show_all)             (ClutterActor          *actor);
  void (* hide)                 (ClutterActor          *actor);
  void (* hide_all)             (ClutterActor          *actor);
  void (* realize)              (ClutterActor          *actor);
  void (* unrealize)            (ClutterActor          *actor);
  void (* paint)                (ClutterActor          *actor);
  void (* parent_set)           (ClutterActor          *actor,
                                 ClutterActor          *old_parent);

  void (* destroy)              (ClutterActor          *actor);
  void (* pick)                 (ClutterActor          *actor,
                                 const ClutterColor    *color);

  /* size negotiation */
  void (* get_preferred_width)  (ClutterActor          *actor,
                                 ClutterUnit            for_height,
                                 ClutterUnit           *min_width_p,
                                 ClutterUnit           *natural_width_p);
  void (* get_preferred_height) (ClutterActor          *actor,
                                 ClutterUnit            for_width,
                                 ClutterUnit           *min_height_p,
                                 ClutterUnit           *natural_height_p);
  void (* allocate)             (ClutterActor          *actor,
                                 const ClutterActorBox *box,
                                 gboolean               absolute_origin_changed);
  /* event signals */
  gboolean (* event)                (ClutterActor         *actor,
                                     ClutterEvent         *event);
  gboolean (* button_press_event)   (ClutterActor         *actor,
                                     ClutterButtonEvent   *event);
  gboolean (* button_release_event) (ClutterActor         *actor,
                                     ClutterButtonEvent   *event);
  gboolean (* scroll_event)         (ClutterActor         *actor,
                                     ClutterScrollEvent   *event);
  gboolean (* key_press_event)      (ClutterActor         *actor,
                                     ClutterKeyEvent      *event);
  gboolean (* key_release_event)    (ClutterActor         *actor,
                                     ClutterKeyEvent      *event);
  gboolean (* motion_event)         (ClutterActor         *actor,
                                     ClutterMotionEvent   *event);
  gboolean (* enter_event)          (ClutterActor         *actor,
                                     ClutterCrossingEvent *event);
  gboolean (* leave_event)          (ClutterActor         *actor,
                                     ClutterCrossingEvent *event);
  gboolean (* captured_event)       (ClutterActor         *actor,
                                     ClutterEvent         *event);
  void     (* focus_in)             (ClutterActor         *actor);
  void     (* focus_out)            (ClutterActor         *actor);
} ClutterActorClass;

Base class for actors.

clutter_actor_show ()

void                clutter_actor_show                  (ClutterActor *self);

Flags an actor to be displayed. An actor that isn't shown will not be rendered on the stage.

Actors are visible by default.

If this function is called on an actor without a parent, the "show-on-set-parent" will be set to TRUE as a side effect.

clutter_actor_show_all ()

void                clutter_actor_show_all              (ClutterActor *self);

Calls clutter_actor_show() on all children of an actor (if any).

Since 0.2

clutter_actor_hide ()

void                clutter_actor_hide                  (ClutterActor *self);

Flags an actor to be hidden. A hidden actor will not be rendered on the stage.

Actors are visible by default.

If this function is called on an actor without a parent, the "show-on-set-parent" property will be set to FALSE as a side-effect.

clutter_actor_hide_all ()

void                clutter_actor_hide_all              (ClutterActor *self);

Calls clutter_actor_hide() on all child actors (if any).

Since 0.2

clutter_actor_realize ()

void                clutter_actor_realize               (ClutterActor *self);

Creates any underlying graphics resources needed by the actor to be displayed.

clutter_actor_unrealize ()

void                clutter_actor_unrealize             (ClutterActor *self);

Frees up any underlying graphics resources needed by the actor to be displayed.

clutter_actor_paint ()

void                clutter_actor_paint                 (ClutterActor *self);

Renders the actor to display.

This function should not be called directly by applications. Call clutter_actor_queue_redraw() to queue paints, instead.

clutter_actor_queue_redraw ()

void                clutter_actor_queue_redraw          (ClutterActor *self);

Queues up a redraw of an actor and any children. The redraw occurs once the main loop becomes idle (after the current batch of events has been processed, roughly).

Applications rarely need to call this, as redraws are handled automatically by modification functions.

clutter_actor_queue_relayout ()

void                clutter_actor_queue_relayout        (ClutterActor *self);

Indicates that the actor's size request or other layout-affecting properties may have changed. This function is used inside ClutterActor subclass implementations, not by applications directly.

Queueing a new layout automatically queues a redraw as well.

Since 0.8

clutter_actor_destroy ()

void                clutter_actor_destroy               (ClutterActor *self);

Destroys an actor. When an actor is destroyed, it will break any references it holds to other objects. If the actor is inside a container, the actor will be removed.

When you destroy a container, its children will be destroyed as well.

Note: you cannot destroy the ClutterStage returned by clutter_stage_get_default().

clutter_actor_event ()

gboolean            clutter_actor_event                 (ClutterActor *actor,
                                                         ClutterEvent *event,
                                                         gboolean capture);

This function is used to emit an event on the main stage. You should rarely need to use this function, except for synthetising events.

Since 0.6

clutter_actor_pick ()

void                clutter_actor_pick                  (ClutterActor *self,
                                                         const ClutterColor *color);

Renders a silhouette of the actor using the supplied color. Used internally for mapping pointer events to actors.

This function should never be called directly by applications.

Subclasses overiding the ClutterActor::pick() method should call clutter_actor_should_pick_paint() to decide whether to render their silhouette. Containers should always recursively call pick for each child.

Since 0.4

clutter_actor_should_pick_paint ()

gboolean            clutter_actor_should_pick_paint     (ClutterActor *self);

Utility call for subclasses overiding the pick method.

This function should never be called directly by applications.

clutter_actor_allocate ()

void                clutter_actor_allocate              (ClutterActor *self,
                                                         const ClutterActorBox *box,
                                                         gboolean absolute_origin_changed);

Called by the parent of an actor to assign the actor its size. Should never be called by applications (except when implementing a container or layout manager).

Actors can know from their allocation box whether they have moved with respect to their parent actor. The absolute_origin_changed parameter additionally indicates whether the parent has moved with respect to the stage, for example because a grandparent's origin has moved.

Since 0.8

clutter_actor_allocate_preferred_size ()

void                clutter_actor_allocate_preferred_size
                                                        (ClutterActor *self,
                                                         gboolean absolute_origin_changed);

Allocates the natural size of self.

This function is a utility call for ClutterActor implementations that allocates the actor's preferred natural size. It can be used by fixed layout managers (like ClutterGroup or so called 'composite actors') inside the ClutterActor::allocate implementation to give each child exactly how much space it requires.

This function is not meant to be used by applications. It is also not meant to be used outside the implementation of the ClutterActor::allocate virtual function.

Since 0.8

clutter_actor_get_allocation_coords ()

void                clutter_actor_get_allocation_coords (ClutterActor *self,
                                                         gint *x_1,
                                                         gint *y_1,
                                                         gint *x_2,
                                                         gint *y_2);

Gets the layout box an actor has been assigned. The allocation can only be assumed valid inside a paint() method; anywhere else, it may be out-of-date.

An allocation does not incorporate the actor's scale or anchor point; those transformations do not affect layout, only rendering.

The returned coordinates are in pixels.

Since 0.8

clutter_actor_get_allocation_box ()

void                clutter_actor_get_allocation_box    (ClutterActor *self,
                                                         ClutterActorBox *box);

Gets the layout box an actor has been assigned. The allocation can only be assumed valid inside a paint() method; anywhere else, it may be out-of-date.

An allocation does not incorporate the actor's scale or anchor point; those transformations do not affect layout, only rendering.

Since 0.8

clutter_actor_get_allocation_geometry ()

void                clutter_actor_get_allocation_geometry
                                                        (ClutterActor *self,
                                                         ClutterGeometry *geom);

Gets the layout box an actor has been assigned. The allocation can only be assumed valid inside a paint() method; anywhere else, it may be out-of-date.

An allocation does not incorporate the actor's scale or anchor point; those transformations do not affect layout, only rendering.

The returned rectangle is in pixels.

Since 0.8

clutter_actor_get_allocation_vertices ()

void                clutter_actor_get_allocation_vertices
                                                        (ClutterActor *self,
                                                         ClutterActor *ancestor,
                                                         ClutterVertex verts[4]);

Calculates the transformed coordinates of the four corners of the actor in the plane of ancestor. The returned vertices relate to the ClutterActorBox coordinates as follows:

If ancestor is NULL the ancestor will be the ClutterStage. In this case, the coordinates returned will be the coordinates on the stage before the projection is applied. This is different from the behaviour of clutter_actor_get_abs_allocation_vertices().

Since 0.6

clutter_actor_get_preferred_size ()

void                clutter_actor_get_preferred_size    (ClutterActor *self,
                                                         ClutterUnit *min_width_p,
                                                         ClutterUnit *min_height_p,
                                                         ClutterUnit *natural_width_p,
                                                         ClutterUnit *natural_height_p);

Computes the preferred minimum and natural size of an actor, taking into account the actor's geometry management (either height-for-width or width-for-height).

The width and height used to compute the preferred height and preferred width are the actor's natural ones.

If you need to control the height for the preferred width, or the width for the preferred height, you should use clutter_actor_get_preferred_width() and clutter_actor_get_preferred_height(), and check the actor's preferred geometry management using the "request-mode" property.

Since 0.8

clutter_actor_get_preferred_width ()

void                clutter_actor_get_preferred_width   (ClutterActor *self,
                                                         ClutterUnit for_height,
                                                         ClutterUnit *min_width_p,
                                                         ClutterUnit *natural_width_p);

Computes the requested minimum and natural widths for an actor, optionally depending on the specified height, or if they are already computed, returns the cached values.

An actor may not get its request - depending on the layout manager that's in effect.

A request should not incorporate the actor's scale or anchor point; those transformations do not affect layout, only rendering.

Since 0.8

clutter_actor_get_preferred_height ()

void                clutter_actor_get_preferred_height  (ClutterActor *self,
                                                         ClutterUnit for_width,
                                                         ClutterUnit *min_height_p,
                                                         ClutterUnit *natural_height_p);

Computes the requested minimum and natural heights for an actor, or if they are already computed, returns the cached values.

An actor may not get its request - depending on the layout manager that's in effect.

A request should not incorporate the actor's scale or anchor point; those transformations do not affect layout, only rendering.

Since 0.8

clutter_actor_set_fixed_position_set ()

void                clutter_actor_set_fixed_position_set
                                                        (ClutterActor *self,
                                                         gboolean is_set);

Sets whether an actor has a fixed position set (and will thus be unaffected by any layout manager).

Since 0.8

clutter_actor_get_fixed_position_set ()

gboolean            clutter_actor_get_fixed_position_set
                                                        (ClutterActor *self);

Checks whether an actor has a fixed position set (and will thus be unaffected by any layout manager).

Since 0.8

clutter_actor_set_geometry ()

void                clutter_actor_set_geometry          (ClutterActor *self,
                                                         const ClutterGeometry *geometry);

Sets the actor's fixed position and forces its minimum and natural size, in pixels. This means the untransformed actor will have the given geometry. This is the same as calling clutter_actor_set_position() and clutter_actor_set_size().

clutter_actor_get_geometry ()

void                clutter_actor_get_geometry          (ClutterActor *self,
                                                         ClutterGeometry *geometry);

Gets the size and position of an actor relative to its parent actor. This is the same as calling clutter_actor_get_position() and clutter_actor_get_size(). It tries to "do what you mean" and get the requested size and position if the actor's allocation is invalid.

clutter_actor_set_size ()

void                clutter_actor_set_size              (ClutterActor *self,
                                                         gint width,
                                                         gint height);

Sets the actor's size request in pixels. This overrides any "normal" size request the actor would have. For example a text actor might normally request the size of the text; this function would force a specific size instead.

If width and/or height are -1 the actor will use its "normal" size request instead of overriding it, i.e. you can "unset" the size with -1.

This function sets or unsets both the minimum and natural size.

clutter_actor_get_size ()

void                clutter_actor_get_size              (ClutterActor *self,
                                                         guint *width,
                                                         guint *height);

This function tries to "do what you mean" and return the size an actor will have. If the actor has a valid allocation, the allocation will be returned; otherwise, the actors natural size request will be returned.

If you care whether you get the request vs. the allocation, you should probably call a different function like clutter_actor_get_allocation_coords() or clutter_actor_get_preferred_width().

Since 0.2

clutter_actor_set_position ()

void                clutter_actor_set_position          (ClutterActor *self,
                                                         gint x,
                                                         gint y);

Sets the actor's fixed position in pixels relative to any parent actor.

If a layout manager is in use, this position will override the layout manager and force a fixed position.

clutter_actor_get_position ()

void                clutter_actor_get_position          (ClutterActor *self,
                                                         gint *x,
                                                         gint *y);

This function tries to "do what you mean" and tell you where the actor is, prior to any transformations. Retrieves the fixed position of an actor in pixels, if one has been set; otherwise, if the allocation is valid, returns the actor's allocated position; otherwise, returns 0,0.

The returned position is in pixels.

Since 0.6

clutter_actor_set_width ()

void                clutter_actor_set_width             (ClutterActor *self,
                                                         guint width);

Forces a width on an actor, causing the actor's preferred width and height (if any) to be ignored.

This function sets both the minimum and natural size of the actor.

Since 0.2

clutter_actor_get_width ()

guint               clutter_actor_get_width             (ClutterActor *self);

Retrieves the width of a ClutterActor.

If the actor has a valid allocation, this function will return the width of the allocated area given to the actor.

If the actor does not have a valid allocation, this function will return the actor's natural width, that is the preferred width of the actor.

If you care whether you get the preferred width or the width that has been assigned to the actor, you should probably call a different function like clutter_actor_get_allocation_coords() to retrieve the allocated size or clutter_actor_get_preferred_width() to retrieve the preferred width.

If an actor has a fixed width, for instance a width that has been assigned using clutter_actor_set_width(), the width returned will be the same value.

clutter_actor_set_height ()

void                clutter_actor_set_height            (ClutterActor *self,
                                                         guint height);

Forces a height on an actor, causing the actor's preferred width and height (if any) to be ignored.

This function sets both the minimum and natural size of the actor.

Since 0.2

clutter_actor_get_height ()

guint               clutter_actor_get_height            (ClutterActor *self);

Retrieves the height of a ClutterActor.

If the actor has a valid allocation, this function will return the height of the allocated area given to the actor.

If the actor does not have a valid allocation, this function will return the actor's natural height, that is the preferred height of the actor.

If you care whether you get the preferred height or the height that has been assigned to the actor, you should probably call a different function like clutter_actor_get_allocation_coords() to retrieve the allocated size or clutter_actor_get_preferred_height() to retrieve the preferred height.

If an actor has a fixed height, for instance a height that has been assigned using clutter_actor_set_height(), the height returned will be the same value.

clutter_actor_set_x ()

void                clutter_actor_set_x                 (ClutterActor *self,
                                                         gint x);

Sets the actor's X coordinate, relative to its parent, in pixels.

Overrides any layout manager and forces a fixed position for the actor.

Since 0.6

clutter_actor_get_x ()

gint                clutter_actor_get_x                 (ClutterActor *self);

Retrieves the X coordinate of a ClutterActor.

This function tries to "do what you mean", by returning the correct value depending on the actor's state.

If the actor has a valid allocation, this function will return the X coordinate of the origin of the allocation box.

If the actor has any fixed coordinate set using clutter_actor_set_x(), clutter_actor_set_position() or clutter_actor_set_geometry(), this function will return that coordinate.

If both the allocation and a fixed position are missing, this function will return 0.

clutter_actor_set_y ()

void                clutter_actor_set_y                 (ClutterActor *self,
                                                         gint y);

Sets the actor's Y coordinate, relative to its parent, in pixels.#

Overrides any layout manager and forces a fixed position for the actor.

Since 0.6

clutter_actor_get_y ()

gint                clutter_actor_get_y                 (ClutterActor *self);

Retrieves the Y coordinate of a ClutterActor.

This function tries to "do what you mean", by returning the correct value depending on the actor's state.

If the actor has a valid allocation, this function will return the Y coordinate of the origin of the allocation box.

If the actor has any fixed coordinate set using clutter_actor_set_y(), clutter_actor_set_position() or clutter_actor_set_geometry(), this function will return that coordinate.

If both the allocation and a fixed position are missing, this function will return 0.

clutter_actor_move_by ()

void                clutter_actor_move_by               (ClutterActor *self,
                                                         gint dx,
                                                         gint dy);

Moves an actor by the specified distance relative to its current position in pixels. This function modifies the fixed position of an actor and thus removes it from any layout management. Another way to move an actor is with an anchor point, see clutter_actor_set_anchor_point().

Since 0.2

clutter_actor_set_rotation ()

void                clutter_actor_set_rotation          (ClutterActor *self,
                                                         ClutterRotateAxis axis,
                                                         gdouble angle,
                                                         gint x,
                                                         gint y,
                                                         gint z);

Sets the rotation angle of self around the given axis.

The rotation center coordinates used depend on the value of axis:

The rotation coordinates are relative to the anchor point of the actor, set using clutter_actor_set_anchor_point(). If no anchor point is set, the upper left corner is assumed as the origin.

Since 0.6

clutter_actor_get_rotation ()

gdouble             clutter_actor_get_rotation          (ClutterActor *self,
                                                         ClutterRotateAxis axis,
                                                         gint *x,
                                                         gint *y,
                                                         gint *z);

Retrieves the angle and center of rotation on the given axis, set using clutter_actor_set_angle().

The coordinates of the center returned by this function depend on the axis passed.

Since 0.6

clutter_actor_is_rotated ()

gboolean            clutter_actor_is_rotated            (ClutterActor *self);

Checks whether any rotation is applied to the actor.

Since 0.6

clutter_actor_set_opacity ()

void                clutter_actor_set_opacity           (ClutterActor *self,
                                                         guint8 opacity);

Sets the actor's opacity, with zero being completely transparent and 255 (0xff) being fully opaque.

clutter_actor_get_opacity ()

guint8              clutter_actor_get_opacity           (ClutterActor *self);

Retrieves the opacity value of an actor, as set by clutter_actor_set_opacity().

For retrieving the absolute opacity of the actor inside a paint virtual function, see clutter_actor_get_paint_opacity().

clutter_actor_set_name ()

void                clutter_actor_set_name              (ClutterActor *self,
                                                         const gchar *name);

Sets the given name to self. The name can be used to identify a ClutterActor.

clutter_actor_get_name ()

const gchar*        clutter_actor_get_name              (ClutterActor *self);

Retrieves the name of self.

clutter_actor_get_gid ()

guint32             clutter_actor_get_gid               (ClutterActor *self);

Retrieves the unique id for self.

Since 0.6

clutter_actor_set_clip ()

void                clutter_actor_set_clip              (ClutterActor *self,
                                                         gint xoff,
                                                         gint yoff,
                                                         gint width,
                                                         gint height);

Sets clip area in pixels for self. The clip area is always computed from the upper left corner of the actor, even if the anchor point is set otherwise.

clutter_actor_remove_clip ()

void                clutter_actor_remove_clip           (ClutterActor *self);

Removes clip area from self.

clutter_actor_has_clip ()

gboolean            clutter_actor_has_clip              (ClutterActor *self);

Determines whether the actor has a clip area set or not.

Since 0.1.1

clutter_actor_get_clip ()

void                clutter_actor_get_clip              (ClutterActor *self,
                                                         gint *xoff,
                                                         gint *yoff,
                                                         gint *width,
                                                         gint *height);

Gets the clip area for self, in pixels.

Since 0.6

clutter_actor_set_parent ()

void                clutter_actor_set_parent            (ClutterActor *self,
                                                         ClutterActor *parent);

Sets the parent of self to parent. The opposite function is clutter_actor_unparent().

This function should not be used by applications, but by custom container actor subclasses.

clutter_actor_get_parent ()

ClutterActor*       clutter_actor_get_parent            (ClutterActor *self);

Retrieves the parent of self.

clutter_actor_reparent ()

void                clutter_actor_reparent              (ClutterActor *self,
                                                         ClutterActor *new_parent);

This function resets the parent actor of self. It is logically equivalent to calling clutter_actor_unparent() and clutter_actor_set_parent().

Since 0.2

clutter_actor_unparent ()

void                clutter_actor_unparent              (ClutterActor *self);

Removes the parent of self.

This function should not be used in applications. It should be called by implementations of container actors, to dissociate a child from the container.

Since 0.1.1

clutter_actor_raise ()

void                clutter_actor_raise                 (ClutterActor *self,
                                                         ClutterActor *below);

Puts self above below.

Both actors must have the same parent.

This function is the equivalent of clutter_container_raise_child().

clutter_actor_lower ()

void                clutter_actor_lower                 (ClutterActor *self,
                                                         ClutterActor *above);

Puts self below above.

Both actors must have the same parent.

This function is the equivalent of clutter_container_lower_child().

clutter_actor_raise_top ()

void                clutter_actor_raise_top             (ClutterActor *self);

Raises self to the top.

This function calls clutter_actor_raise() internally.

clutter_actor_lower_bottom ()

void                clutter_actor_lower_bottom          (ClutterActor *self);

Lowers self to the bottom.

This function calls clutter_actor_lower() internally.

clutter_actor_get_stage ()

ClutterActor*       clutter_actor_get_stage             (ClutterActor *actor);

Retrieves the ClutterStage where actor is contained.

Since 0.8

clutter_actor_set_depth ()

void                clutter_actor_set_depth             (ClutterActor *self,
                                                         gint depth);

Sets the Z co-ordinate of self to depth. The Units of which are dependant on the perspective setup.

clutter_actor_get_depth ()

gint                clutter_actor_get_depth             (ClutterActor *self);

Retrieves the depth of self.

clutter_actor_set_scale ()

void                clutter_actor_set_scale             (ClutterActor *self,
                                                         gdouble scale_x,
                                                         gdouble scale_y);

Scales an actor with the given factors. The scaling is always relative to the anchor point.

Since 0.2

clutter_actor_get_scale ()

void                clutter_actor_get_scale             (ClutterActor *self,
                                                         gdouble *scale_x,
                                                         gdouble *scale_y);

Retrieves an actors scale in floating point.

Since 0.2

clutter_actor_is_scaled ()

gboolean            clutter_actor_is_scaled             (ClutterActor *self);

Checks whether the actor is scaled in either dimension.

Since 0.6

clutter_actor_apply_transform_to_point ()

void                clutter_actor_apply_transform_to_point
                                                        (ClutterActor *self,
                                                         ClutterVertex *point,
                                                         ClutterVertex *vertex);

Transforms point in coordinates relative to the actor into screen-relative coordinates with the current actor transformation (i.e. scale, rotation, etc)

Since 0.4

clutter_actor_transform_stage_point ()

gboolean            clutter_actor_transform_stage_point (ClutterActor *self,
                                                         ClutterUnit x,
                                                         ClutterUnit y,
                                                         ClutterUnit *x_out,
                                                         ClutterUnit *y_out);

This function translates screen coordinates (x, y) to coordinates relative to the actor. For example, it can be used to translate screen events from global screen coordinates into actor-local coordinates.

The conversion can fail, notably if the transform stack results in the actor being projected on the screen as a mere line.

The conversion should not be expected to be pixel-perfect due to the nature of the operation. In general the error grows when the skewing of the actor rectangle on screen increases.

Note: This function is fairly computationally intensive.

Note: This function only works when the allocation is up-to-date, i.e. inside of paint()

Since 0.6

clutter_actor_apply_relative_transform_to_point ()

void                clutter_actor_apply_relative_transform_to_point
                                                        (ClutterActor *self,
                                                         ClutterActor *ancestor,
                                                         ClutterVertex *point,
                                                         ClutterVertex *vertex);

Transforms point in coordinates relative to the actor into ancestor-relative coordinates using the relevant transform stack (i.e. scale, rotation, etc).

If ancestor is NULL the ancestor will be the ClutterStage. In this case, the coordinates returned will be the coordinates on the stage before the projection is applied. This is different from the behaviour of clutter_actor_apply_transform_to_point().

Since 0.6

clutter_actor_get_transformed_position ()

void                clutter_actor_get_transformed_position
                                                        (ClutterActor *self,
                                                         gint *x,
                                                         gint *y);

Gets the absolute position of an actor, in pixels, relative to the stage.

Since 0.8

clutter_actor_get_transformed_size ()

void                clutter_actor_get_transformed_size  (ClutterActor *self,
                                                         guint *width,
                                                         guint *height);

Gets the absolute size of an actor taking into account any scaling factors

Since 0.8

clutter_actor_get_paint_opacity ()

guint8              clutter_actor_get_paint_opacity     (ClutterActor *self);

Retrieves the absolute opacity of the actor, as it appears on the stage.

This function traverses the hierarchy chain and composites the opacity of the actor with that of its parents.

This function is intended for subclasses to use in the paint virtual function, to paint themselves with the correct opacity.

Since 0.8

clutter_actor_get_abs_allocation_vertices ()

void                clutter_actor_get_abs_allocation_vertices
                                                        (ClutterActor *self,
                                                         ClutterVertex verts[4]);

Calculates the transformed screen coordinates of the four corners of the actor; the returned vertices relate to the ClutterActorBox coordinates as follows:

Since 0.4

ClutterVertex

typedef struct {
  ClutterUnit x;
  ClutterUnit y;
  ClutterUnit z;
} ClutterVertex;

Vertex of an actor in 3D space, expressed in device independent units.

Since 0.4

clutter_actor_box_get_from_vertices ()

void                clutter_actor_box_get_from_vertices (ClutterVertex vtx[4],
                                                         ClutterActorBox *box);

Calculates the bounding box represented by the four vertices; for details of the vertex array see clutter_actor_get_abs_allocation_vertices().

Since 0.6

clutter_actor_set_anchor_point ()

void                clutter_actor_set_anchor_point      (ClutterActor *self,
                                                         gint anchor_x,
                                                         gint anchor_y);

Sets an anchor point for the actor. The anchor point is a point in the coordinate space of an actor to which the actor position within its parent is relative; the default is (0, 0), i.e. the top-left corner of the actor.

Since 0.6

clutter_actor_get_anchor_point ()

void                clutter_actor_get_anchor_point      (ClutterActor *self,
                                                         gint *anchor_x,
                                                         gint *anchor_y);

Gets the current anchor point of the actor in pixels.

Since 0.6

clutter_actor_set_anchor_point_from_gravity ()

void                clutter_actor_set_anchor_point_from_gravity
                                                        (ClutterActor *self,
                                                         ClutterGravity gravity);

Sets an anchor point on the actor, based on the given gravity (this is a convenience function wrapping clutter_actor_set_anchor_point()).

Note that the anchor is still stored as a point and the gravity value is forgotten. For example, if you set the anchor point to CLUTTER_GRAVITY_SOUTH_EAST and later double the size of the actor, the anchor point will not move to the bottom right and will now be in the center of the actor.

Since 0.6

clutter_actor_move_anchor_point ()

void                clutter_actor_move_anchor_point     (ClutterActor *self,
                                                         gint anchor_x,
                                                         gint anchor_y);

Sets an anchor point for the actor, and adjusts the actor postion so that the relative position of the actor toward its parent remains the same.

Since 0.6

clutter_actor_move_anchor_point_from_gravity ()

void                clutter_actor_move_anchor_point_from_gravity
                                                        (ClutterActor *self,
                                                         ClutterGravity gravity);

Sets an anchor point on the actor based on the given gravity, adjusting the actor postion so that its relative position within its parent remains unchanged.

Note that the anchor is still stored as a point and the gravity value is forgotten. For example, if you set the anchor point to CLUTTER_GRAVITY_SOUTH_EAST and later double the size of the actor, the anchor point will not move to the bottom right and will now be in the center of the actor.

Since 0.6

clutter_actor_set_reactive ()

void                clutter_actor_set_reactive          (ClutterActor *actor,
                                                         gboolean reactive);

Sets actor as reactive. Reactive actors will receive events.

Since 0.6

clutter_actor_get_reactive ()

gboolean            clutter_actor_get_reactive          (ClutterActor *actor);

Checks whether actor is marked as reactive.

Since 0.6

clutter_actor_set_shader ()

gboolean            clutter_actor_set_shader            (ClutterActor *self,
                                                         ClutterShader *shader);

Sets the ClutterShader to be used when rendering self. If shader is NULL it will unset any currently set shader for the actor.

Since 0.6

clutter_actor_get_shader ()

ClutterShader*      clutter_actor_get_shader            (ClutterActor *self);

Queries the currently set ClutterShader on self.

Since 0.6

clutter_actor_set_shader_param ()

void                clutter_actor_set_shader_param      (ClutterActor *self,
                                                         const gchar *param,
                                                         gfloat value);

Sets the value for a named parameter of the shader applied to actor.

Since 0.6

clutter_actor_set_depthu ()

void                clutter_actor_set_depthu            (ClutterActor *self,
                                                         ClutterUnit depth);

Sets the Z co-ordinate of self to depth in ClutterUnits, the units of which are dependant on the perspective setup.

clutter_actor_get_depthu ()

ClutterUnit         clutter_actor_get_depthu            (ClutterActor *self);

Retrieves the depth of self.

Since 0.6

clutter_actor_set_heightu ()

void                clutter_actor_set_heightu           (ClutterActor *self,
                                                         ClutterUnit height);

Forces a height on an actor, causing the actor's preferred width and height (if any) to be ignored.

This function sets both the minimum and natural size of the actor.

Since 0.6

clutter_actor_get_heightu ()

ClutterUnit         clutter_actor_get_heightu           (ClutterActor *self);

Retrieves the height of a ClutterActor, in ClutterUnits.

If the actor has a valid allocation, this function will return the height of the allocated area given to the actor.

If the actor does not have a valid allocation, this function will return the actor's natural height, that is the preferred height of the actor.

If you care whether you get the preferred height or the height that has been assigned to the actor, you should probably call a different function like clutter_actor_get_allocation_coords() to retrieve the allocated size or clutter_actor_get_preferred_height() to retrieve the preferred height.

If an actor has a fixed height, for instance a height that has been assigned using clutter_actor_set_height(), the height returned will be the same value.

Since 0.6

clutter_actor_set_widthu ()

void                clutter_actor_set_widthu            (ClutterActor *self,
                                                         ClutterUnit width);

Forces a width on an actor, causing the actor's preferred width and height (if any) to be ignored.

This function sets both the minimum and natural size of the actor.

Since 0.6

clutter_actor_get_widthu ()

ClutterUnit         clutter_actor_get_widthu            (ClutterActor *self);

Retrieves the width of a ClutterActor, in ClutterUnits.

If the actor has a valid allocation, this function will return the width of the allocated area given to the actor.

If the actor does not have a valid allocation, this function will return the actor's natural width, that is the preferred width of the actor.

If you care whether you get the preferred width or the width that has been assigned to the actor, you should probably call a different function like clutter_actor_get_allocation_coords() to retrieve the allocated size or clutter_actor_get_preferred_width() to retrieve the preferred width.

If an actor has a fixed width, for instance a width that has been assigned using clutter_actor_set_width(), the width returned will be the same value.

Since 0.6

clutter_actor_set_xu ()

void                clutter_actor_set_xu                (ClutterActor *self,
                                                         ClutterUnit x);

Sets the actor's X coordinate, relative to its parent.

Overrides any layout manager and forces a fixed position for the actor.

Since 0.6

clutter_actor_get_xu ()

ClutterUnit         clutter_actor_get_xu                (ClutterActor *self);

Retrieves the X coordinate of a ClutterActor, in ClutterUnits.

This function tries to "do what you mean", by returning the correct value depending on the actor's state.

If the actor has a valid allocation, this function will return the X coordinate of the origin of the allocation box.

If the actor has any fixed coordinate set using clutter_actor_set_x(), clutter_actor_set_position() or clutter_actor_set_geometry(), this function will return that coordinate.

If both the allocation and a fixed position are missing, this function will return 0.

Since 0.6

clutter_actor_set_yu ()

void                clutter_actor_set_yu                (ClutterActor *self,
                                                         ClutterUnit y);

Sets the actor's Y coordinate, relative to its parent.

Overrides any layout manager and forces a fixed position for the actor.

Since 0.6

clutter_actor_get_yu ()

ClutterUnit         clutter_actor_get_yu                (ClutterActor *self);

Retrieves the Y coordinate of a ClutterActor, in ClutterUnits.

This function tries to "do what you mean", by returning the correct value depending on the actor's state.

If the actor has a valid allocation, this function will return the Y coordinate of the origin of the allocation box.

If the actor has any fixed coordinate set using clutter_actor_set_y(), clutter_actor_set_position() or clutter_actor_set_geometry(), this function will return that coordinate.

If both the allocation and a fixed position are missing, this function will return 0.

Since 0.6

clutter_actor_set_positionu ()

void                clutter_actor_set_positionu         (ClutterActor *self,
                                                         ClutterUnit x,
                                                         ClutterUnit y);

Sets the actor's position in ClutterUnits relative to any parent actor.

If a layout manager is in use, this position will override the layout manager and force a fixed position.

Since 0.6

clutter_actor_get_positionu ()

void                clutter_actor_get_positionu         (ClutterActor *self,
                                                         ClutterUnit *x,
                                                         ClutterUnit *y);

This function tries to "do what you mean" and tell you where the actor is, prior to any transformations. Retrieves the fixed position of an actor in pixels, if one has been set; otherwise, if the allocation is valid, returns the actor's allocated position; otherwise, returns 0,0.

The returned position is in ClutterUnits.

Since 0.6

clutter_actor_set_sizeu ()

void                clutter_actor_set_sizeu             (ClutterActor *self,
                                                         ClutterUnit width,
                                                         ClutterUnit height);

Overrides the actor's size request in ClutterUnits. If width and/or height are -1 the actor will use its normal size request (the override is removed).

This function sets or unsets both the minimum and natural size.

Since 0.6

clutter_actor_get_sizeu ()

void                clutter_actor_get_sizeu             (ClutterActor *self,
                                                         ClutterUnit *width,
                                                         ClutterUnit *height);

This function tries to "do what you mean" and return the size an actor will have. If the actor has a valid allocation, the allocation will be returned; otherwise, the actors natural size request will be returned.

If you care whether you get the request vs. the allocation, you should probably call a different function like clutter_actor_get_allocation_coords() or clutter_actor_get_preferred_width().

Since 0.6

clutter_actor_set_anchor_pointu ()

void                clutter_actor_set_anchor_pointu     (ClutterActor *self,
                                                         ClutterUnit anchor_x,
                                                         ClutterUnit anchor_y);

Sets an anchor point for self. The anchor point is a point in the coordinate space of an actor to which the actor position within its parent is relative; the default is (0, 0), i.e. the top-left corner of the actor.

Since 0.6

clutter_actor_get_anchor_pointu ()

void                clutter_actor_get_anchor_pointu     (ClutterActor *self,
                                                         ClutterUnit *anchor_x,
                                                         ClutterUnit *anchor_y);

Gets the current anchor point of the actor in ClutterUnits.

Since 0.6

clutter_actor_move_anchor_pointu ()

void                clutter_actor_move_anchor_pointu    (ClutterActor *self,
                                                         ClutterUnit anchor_x,
                                                         ClutterUnit anchor_y);

Sets an anchor point for the actor, and adjusts the actor postion so that the relative position of the actor toward its parent remains the same.

Since 0.6

clutter_actor_set_clipu ()

void                clutter_actor_set_clipu             (ClutterActor *self,
                                                         ClutterUnit xoff,
                                                         ClutterUnit yoff,
                                                         ClutterUnit width,
                                                         ClutterUnit height);

Unit-based variant of clutter_actor_set_clip()

Sets clip area for self. The clip area is always computed from the upper left corner of the actor, even if the anchor point is set otherwise.

Since 0.6

clutter_actor_get_clipu ()

void                clutter_actor_get_clipu             (ClutterActor *self,
                                                         ClutterUnit *xoff,
                                                         ClutterUnit *yoff,
                                                         ClutterUnit *width,
                                                         ClutterUnit *height);

Unit-based variant of clutter_actor_get_clip().

Gets the clip area for self, in ClutterUnits.

Since 0.6

clutter_actor_set_rotationu ()

void                clutter_actor_set_rotationu         (ClutterActor *self,
                                                         ClutterRotateAxis axis,
                                                         gdouble angle,
                                                         ClutterUnit x,
                                                         ClutterUnit y,
                                                         ClutterUnit z);

Sets the rotation angle of self around the given axis.

This function is the units based variant of clutter_actor_set_rotation().

Since 0.8

clutter_actor_get_rotationu ()

gdouble             clutter_actor_get_rotationu         (ClutterActor *self,
                                                         ClutterRotateAxis axis,
                                                         ClutterUnit *x,
                                                         ClutterUnit *y,
                                                         ClutterUnit *z);

Retrieves the angle and center of rotation on the given axis, set using clutter_actor_set_rotation().

This function is the units based variant of clutter_actor_get_rotation().

Since 0.8

clutter_actor_move_byu ()

void                clutter_actor_move_byu              (ClutterActor *self,
                                                         ClutterUnit dx,
                                                         ClutterUnit dy);

Moves an actor by the specified distance relative to its current position.

The move is accomplished by setting a fixed position, overriding any layout manager, see clutter_actor_set_positionu().

Since 0.6

clutter_actor_get_transformed_positionu ()

void                clutter_actor_get_transformed_positionu
                                                        (ClutterActor *self,
                                                         ClutterUnit *x,
                                                         ClutterUnit *y);

Gets the absolute position of an actor, in ClutterUnits, relative to the stage.

Since 0.8

clutter_actor_get_transformed_sizeu ()

void                clutter_actor_get_transformed_sizeu (ClutterActor *self,
                                                         ClutterUnit *width,
                                                         ClutterUnit *height);

Gets the absolute size of an actor in ClutterUnitss, taking into account the scaling factors.

If the actor has a valid allocation, the allocated size will be used. If the actor has not a valid allocation then the preferred size will be transformed and returned.

If you want the transformed allocation, see clutter_actor_get_abs_allocation_vertices() instead.

Since 0.8

clutter_actor_set_scalex ()

void                clutter_actor_set_scalex            (ClutterActor *self,
                                                         ClutterFixed scale_x,
                                                         ClutterFixed scale_y);

Fixed point version of clutter_actor_set_scale().

Scales an actor with the given factors. The scaling is always relative to the anchor point.

clutter_actor_get_scalex ()

void                clutter_actor_get_scalex            (ClutterActor *self,
                                                         ClutterFixed *scale_x,
                                                         ClutterFixed *scale_y);

Fixed point version of clutter_actor_get_scale().

Retrieves the scale factors of an actor.

Since 0.2

clutter_actor_set_rotationx ()

void                clutter_actor_set_rotationx         (ClutterActor *self,
                                                         ClutterRotateAxis axis,
                                                         ClutterFixed angle,
                                                         gint x,
                                                         gint y,
                                                         gint z);

Sets the rotation angle of self around the given axis.

This function is the fixed point variant of clutter_actor_set_rotation().

Since 0.6

clutter_actor_get_rotationx ()

ClutterFixed        clutter_actor_get_rotationx         (ClutterActor *self,
                                                         ClutterRotateAxis axis,
                                                         gint *x,
                                                         gint *y,
                                                         gint *z);

Retrieves the angle and center of rotation on the given axis, set using clutter_actor_set_rotation().

This function is the fixed point variant of clutter_actor_get_rotation().

Since 0.6

The "allocation" property

  "allocation"               ClutterActorBox*      : Read

The allocation for the actor, in ClutterUnits. This is read-only, but you might monitor this property to know when an actor moves or resizes.

Since 0.8

The "anchor-x" property

  "anchor-x"                 gint                  : Read / Write

X coordinate of the anchor point.

Allowed values: >= -2147483647

Default value: 0

The "anchor-y" property

  "anchor-y"                 gint                  : Read / Write

Y coordinate of the anchor point.

Allowed values: >= -2147483647

Default value: 0

The "clip" property

  "clip"                     ClutterGeometry*      : Read / Write

The clip region for the actor.

The "depth" property

  "depth"                    gint                  : Read / Write

Depth of the actor.

Allowed values: >= -2147483647

Default value: 0

Since 0.6

The "fixed-position-set" property

  "fixed-position-set"       gboolean              : Read / Write

This flag controls whether the fixed-x and fixed-y properties are used.

Default value: FALSE

Since 0.8

The "fixed-x" property

  "fixed-x"                  ClutterUnit           : Read / Write

The fixed X position of the actor in ClutterUnits. Writing this property sets the fixed-position-set property as well, as a side effect.

Since 0.8

The "fixed-y" property

  "fixed-y"                  ClutterUnit           : Read / Write

The fixed Y position of the actor in ClutterUnits. Writing this property sets the fixed-position-set property as well, as a side effect.

Since 0.8

The "has-clip" property

  "has-clip"                 gboolean              : Read

Whether the actor has the clip property set or not.

Default value: FALSE

The "height" property

  "height"                   gint                  : Read / Write

Height of the actor (in pixels). If written, forces the minimum and natural size request of the actor to the given height. If read, returns the allocated height if available, otherwise the height request.

Allowed values: >= 0

Default value: 0

The "min-height" property

  "min-height"               ClutterUnit           : Read / Write

A forced minimum height request for the actor, in ClutterUnits. Writing this property sets the min-height-set property as well, as a side effect. This property overrides the usual height request of the actor.

Since 0.8

The "min-height-set" property

  "min-height-set"           gboolean              : Read / Write

This flag controls whether the min-height property is used.

Default value: FALSE

Since 0.8

The "min-width" property

  "min-width"                ClutterUnit           : Read / Write

A forced minimum width request for the actor, in ClutterUnits. Writing this property sets the min-width-set property as well, as a side effect. This property overrides the usual width request of the actor.

Since 0.8

The "min-width-set" property

  "min-width-set"            gboolean              : Read / Write

This flag controls whether the min-width property is used.

Default value: FALSE

Since 0.8

The "name" property

  "name"                     gchar*                : Read / Write

The name of the actor.

Default value: NULL

Since 0.2

The "natural-height" property

  "natural-height"           ClutterUnit           : Read / Write

A forced natural height request for the actor, in ClutterUnits. Writing this property sets the natural-height-set property as well, as a side effect. This property overrides the usual height request of the actor.

Since 0.8

The "natural-height-set" property

  "natural-height-set"       gboolean              : Read / Write

This flag controls whether the natural-height property is used.

Default value: FALSE

Since 0.8

The "natural-width" property

  "natural-width"            ClutterUnit           : Read / Write

A forced natural width request for the actor, in ClutterUnits. Writing this property sets the natural-width-set property as well, as a side effect. This property overrides the usual width request of the actor.

Since 0.8

The "natural-width-set" property

  "natural-width-set"        gboolean              : Read / Write

This flag controls whether the natural-width property is used.

Default value: FALSE

Since 0.8

The "opacity" property

  "opacity"                  guchar                : Read / Write

Opacity of the actor.

Default value: 255

The "reactive" property

  "reactive"                 gboolean              : Read / Write

Whether the actor is reactive to events or not.

Default value: FALSE

Since 0.6

The "request-mode" property

  "request-mode"             ClutterRequestMode    : Read / Write

Request mode for the ClutterActor. The request mode determines the type of geometry management used by the actor, either height for width (the default) or width for height.

For actors implementing height for width, the parent container should get the preferred width first, and then the preferred height for that width.

For actors implementing width for height, the parent container should get the preferred height first, and then the preferred width for that height.

For instance:

  ClutterRequestMode mode;
  ClutterUnit natural_width, min_width;
  ClutterUnit natural_height, min_height;

  g_object_get (G_OBJECT (child), "request-mode", &mode, NULL);
  if (mode == CLUTTER_REQUEST_HEIGHT_FOR_WIDTH)
    {
      clutter_actor_get_preferred_width (child, -1,
                                         &min_width,
                                         &natural_width);
      clutter_actor_get_preferred_height (child, natural_width,
                                          &min_height,
                                          &natural_height);
    }
  else
    {
      clutter_actor_get_preferred_height (child, -1,
                                          &min_height,
                                          &natural_height);
      clutter_actor_get_preferred_width (child, natural_height,
                                         &min_width,
                                         &natural_width);
    }

will retrieve the minimum and natural width and height depending on the preferred request mode of the ClutterActor "child".

The clutter_actor_get_preferred_size() function will implement this check for you.

Default value: CLUTTER_REQUEST_HEIGHT_FOR_WIDTH

Since 0.8

The "rotation-angle-x" property

  "rotation-angle-x"         gdouble               : Read / Write

The rotation angle on the X axis.

Allowed values: >= 0

Default value: 0

The "rotation-angle-y" property

  "rotation-angle-y"         gdouble               : Read / Write

The rotation angle on the Y axis.

Allowed values: >= 0

Default value: 0

The "rotation-angle-z" property

  "rotation-angle-z"         gdouble               : Read / Write

The rotation angle on the Z axis.

Allowed values: >= 0

Default value: 0

The "rotation-center-x" property

  "rotation-center-x"        ClutterVertex*        : Read / Write

The rotation center on the X axis.

The "rotation-center-y" property

  "rotation-center-y"        ClutterVertex*        : Read / Write

The rotation center on the Y axis.

The "rotation-center-z" property

  "rotation-center-z"        ClutterVertex*        : Read / Write

The rotation center on the Z axis.

The "scale-x" property

  "scale-x"                  gdouble               : Read / Write

Scale factor on the X axis.

Allowed values: >= 0

Default value: 1

The "scale-y" property

  "scale-y"                  gdouble               : Read / Write

Scale factor on the Y axis.

Allowed values: >= 0

Default value: 1

The "show-on-set-parent" property

  "show-on-set-parent"       gboolean              : Read / Write

If TRUE, the actor is automatically shown when parented.

Calling clutter_actor_hide() on an actor which has not been parented will set this property to FALSE as a side effect.

Default value: TRUE

Since 0.8

The "visible" property

  "visible"                  gboolean              : Read / Write

Whether the actor is visible or not.

Default value: FALSE

The "width" property

  "width"                    gint                  : Read / Write

Width of the actor (in pixels). If written, forces the minimum and natural size request of the actor to the given width. If read, returns the allocated width if available, otherwise the width request.

Allowed values: >= 0

Default value: 0

The "x" property

  "x"                        gint                  : Read / Write

X coordinate of the actor in pixels. If written, forces a fixed position for the actor. If read, returns the fixed position if any, otherwise the allocation if available, otherwise 0.

Allowed values: >= -2147483647

Default value: 0

The "y" property

  "y"                        gint                  : Read / Write

Y coordinate of the actor in pixels. If written, forces a fixed position for the actor. If read, returns the fixed position if any, otherwise the allocation if available, otherwise 0.

Allowed values: >= -2147483647

Default value: 0

The "button-press-event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::button-press-event signal is emitted each time a mouse button is pressed on actor.

Since 0.6

The "button-release-event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::button-release-event signal is emitted each time a mouse button is released on actor.

Since 0.6

The "captured-event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::captured-event signal is emitted when an event is captured by Clutter. This signal will be emitted starting from the top-level container (the ClutterStage) to the actor which received the event going down the hierarchy. This signal can be used to intercept every event before the specialized events (like ClutterActor::button-press-event or ::key-released-event) are emitted.

Since 0.6

The "destroy" signal

void                user_function                      (ClutterActor *actor,
                                                        gpointer      user_data)      : Cleanup / No Recursion / No Hooks

The ::destroy signal is emitted when an actor is destroyed, either by direct invocation of clutter_actor_destroy() or when the ClutterGroup that contains the actor is destroyed.

Since 0.2

The "enter-event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::enter-event signal is emitted when the pointer enters the actor

Since 0.6

The "event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::event signal is emitted each time an event is received by the actor. This signal will be emitted on every actor, following the hierarchy chain, until it reaches the top-level container (the ClutterStage).

Since 0.6

The "focus-in" signal

void                user_function                      (ClutterActor *actor,
                                                        gpointer      user_data)      : Run Last

The ::focus-in signal is emitted when actor recieves key focus.

Since 0.6

The "focus-out" signal

void                user_function                      (ClutterActor *actor,
                                                        gpointer      user_data)      : Run Last

The ::focus-out signal is emitted when actor loses key focus.

Since 0.6

The "hide" signal

void                user_function                      (ClutterActor *actor,
                                                        gpointer      user_data)      : Run First

The ::hide signal is emitted when an actor is no longer rendered on the stage.

Since 0.2

The "key-press-event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::key-press-event signal is emitted each time a keyboard button is pressed while actor has key focus (see clutter_stage_set_key_focus()).

Since 0.6

The "key-release-event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::key-release-event signal is emitted each time a keyboard button is released while actor has key focus (see clutter_stage_set_key_focus()).

Since 0.6

The "leave-event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::leave-event signal is emitted when the pointer leaves the actor.

Since 0.6

The "motion-event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::motion-event signal is emitted each time the mouse pointer is moved over actor.

Since 0.6

The "paint" signal

void                user_function                      (ClutterActor *actor,
                                                        gpointer      user_data)      : Run Last

The ::paint signal is emitted each time an actor is being painted.

Subclasses of ClutterActor should override the class signal handler and paint themselves in that function.

It is possible to connect a handler to the ::paint signal in order to set up some custom aspect of a paint.

Since 0.8

The "parent-set" signal

void                user_function                      (ClutterActor *actor,
                                                        ClutterActor *old_parent,
                                                        gpointer      user_data)       : Run Last

This signal is emitted when the parent of the actor changes.

Since 0.2

The "realize" signal

void                user_function                      (ClutterActor *actor,
                                                        gpointer      user_data)      : Run Last

The ::realize signal is emitted each time an actor is being realized.

Since 0.8

The "scroll-event" signal

gboolean            user_function                      (ClutterActor *actor,
                                                        ClutterEvent *event,
                                                        gpointer      user_data)      : Run Last

The ::scroll-event signal is emitted each time the mouse is scrolled on actor

Since 0.6

The "show" signal

void                user_function                      (ClutterActor *actor,
                                                        gpointer      user_data)      : Run First

The ::show signal is emitted when an actor is visible and rendered on the stage.

Since 0.2

The "unrealize" signal

void                user_function                      (ClutterActor *actor,
                                                        gpointer      user_data)      : Run Last

The ::unrealize signal is emitted each time an actor is being unrealized.

Since 0.8