| 1.8.1-0maemo1 | * Initial release. (Give it a TRY !!!).
* Makefile.am: Added pkt-custom-request-vlan-llc.dat to EXTRA_DIST.
* configure.ac: Incremented version to 1.8.1.
* Released arp-scan version 1.8.
tarball arp-scan-1.8.tar.gz, size 430221 bytes
md5sum be8826574ec566217eb7ca040fe472f9
* configure.ac: Remove version number from AM_INIT_AUTOMAKE macro,
as this usage is obsolete now. Incremented version to 1.8.
* ieee-oui.txt, ieee-iab.txt: Updated IEEE OUI and IAB listings from
IEEE website using get-oui and get-iab Perl scripts.
* pkt-custom-request-vlan-llc.dat: New data file for check-packet
script containing custom ARP request with 802.1Q VLAN tag and
LLC/SNAP framing.
* check-packet: Added check for custom ARP request with 802.1Q VLAN
tag and LLC/SNAP framing.
* pkt-vlan-llc-response.pcap: New file containing an example of
an ARP reply with 802.1Q tag and LLC/SNAP framing. From a Cisco
2621 router.
* pkt-trailer-response.pcap: Renamed from pkt-trailer-reply.pcap.
* check-decode: New checks for trailer response and 802.1Q/LLC
responses.
* arp-scan.c: Modified pcap filter string to capture ARP responses
with both 802.1Q tag and LLC/SNAP framing.
* Makefile.am: Include pkt-trailer-response.pcap and
pkt-vlan-llc-response.pcap.
* arp-scan.c: Modified usage() so that it can output either brief or
detailed help output depending on a new "detailed" argument. Now,
detailed output, including information on the available options, is
only displayed when arp-scan is run with the --help option. For
error conditions such as incorrect options, it only produces brief
output.
* arp-scan.c: Modify display_packet() to report responses where the
ARP protocol type (ar$pro) is not IP (0x0800). This allows trailer
negotiation responses to be distinguished from regular ARP replies.
* pkt-trailer-reply.pcap: New file containing an example of a trailer
negotiation ARP response from a Quasijarus 4.3BSD system on SIMH VAX.
* arp-fingerprint: Added fingerprint for Blackberry OS.
* arp-scan.h: On Apple Mac OS X systems with Xcode 2.5 and later,
include before .
* configure.ac: Increment version number to 1.7.6.
* acinclude.m4: Changed GCC_FORTIFY_SOURCE macro so the test program
doesn't include , because that header file is not
present on all the operating systems that we support, e.g. OpenBSD.
* arp-scan.c: Use pcap_get_selectable_fd() rather than pcap_fileno()
to get the pcap file descriptor.
* check-host-list: Added new test to check the creation of the host
list.
* arp-scan.c: When using --writepkttofile we no longer open a link
layer socket or a pcap handle, so we don't need root privileges.
* check-packet: Remove check for root privileges as this is no longer
needed.
* check-decode: Added two new tests to improve code coverage.
* arp-scan.c, arp-scan.h: Modify add_host_pattern() and add_host() so
we always use the more efficient inet_pton() rather than
get_host_address() for IPnet/bits, IPnet:mask and IPstart-IPend
patterns.
* arp-scan.c: Change operation of --readpktfromfile so it reads from
a pcap savefile rather than from a raw file.
* pkt-simple-response.pcap, pkt-padding-response.pcap,
pkt-vlan-response.pcap, pkt-llc-response.pcap: New pcap format
files for check-decode.
* check-decode: Modified to use new pcap format savefiles, and remove
check for root privileges as this is no longer needed.
* link-dlpi.c: Fix "comparison between signed and unsigned" warning in
function dlpi_msg.
* arp-fingerprint: Added fingerprint for Windows 7.
* arp-scan.c: Changed what gets displayed for the different verbose
levels, and updated the --help output to reflect the new behaviour.
* check-packet, check-decode: New checks to check packet creation and
packet decoding.
* pkt-custom-request.dat, pkt-custom-request-llc.dat,
pkt-custom-request-padding.dat, pkt-custom-request-vlan.dat,
pkt-padding-response.dat, pkt-simple-request.dat,
pkt-simple-response.dat: Data files for check-packet and check-decode
scripts.
* Makefile.am: Add new check scripts and data files.
* arp-scan.c, arp-scan.h: Added undocumented options --writepkttofile
and --readpktfromfile to allow data to be written to or read from a
file instead of the network for testing.
* arp-scan.c: Use "stdin" instead of fdopen(0,"r") when using
--filename=-, fixing a bug which was causing fd 0 to be closed.
Set the frame type correctly for LLC/SNAP format frames: before
it was always set to 0x0806.
* configure.ac: Add headers required for --writepkttofile and
--readpktfromfile. Increment version number to 1.7.5.
* COPYING: Changed license from GPLv2 to GPLv3.
* Modified licence statement in source files to specify GPLv3
* Modified copyright statement in files to include up to 2011.
* arp-scan.c: Change req_interval back from unsigned to int. This
addresses a bug in the timing code that was introduced in svn
r18043, which caused the packet rate to be very high irrespective
of the specified interval.
* configure.ac: Enable -Wextra warnings for gcc. Increment version
number to 1.7.4.
* hash.c, hash.h, obstack.c, obstack.h: Updated version of GAS hash
table code to the latest version from GNU binutils 2.21. This new
version addresses the shadowed variable warnings that the old version
used to produce when compiled with -Wshadow.
* configure.ac: define ATTRIBUTE_UNUSED macro to enable portable use
of attribute unused to mark possibly unused function arguments.
* arp-scan.c: Minor changes to remove a couple of shadowed variable
warnings.
* acinclude.m4: Added GCC_WEXTRA macro to determine if the C compiler
supports the -Wextra switch to enable extra warnings.
* arp-scan.c, arp-scan.h, utils.c: Remove unused function parameters
and address signed/unsigned comparisons highlighted by -Wextra.
* arp-scan.1: Added warning about setting ar$spa to the destination
IP address. Suggested by Ed Schaller.
* arp-fingerprint: Added 2.11BSD
* arp-scan.c, utils.c: Improve handling of --bandwidth and
--interval options: Allow either upper or lowercase
multiplier letters and give an error if an unknown multiplier
character is used. Previously an unknown multiplier character
or one with the wrong case was silently ignored and treated as
no multiplier at all.
* wrappers.c: Change Strtoul and Strtol so they give an error
if the underlying function finishes at an unconvertible
character other than NULL or whitespace.
* configure.ac: Added extra warning "-Wwrite-strings" for gcc.
* arp-scan.c, arp-scan.h, configure.ac, error.c: Removed syslog
functionality as this is not used and has been #ifdef'ed out
for some time.
* autoconf.ac: Updated to autoconf 2.61
* acinclude.m4: Added macros to detect compiler support for
-fstack-protect, -D_FORTIFY_SOURCE and -Wformat-security.
* configure.ac: Conditionally enable compiler flags for
-fstack-protect, -D_FORTIFY_SOURCE and -Wformat-security using
the new acinclude.m4 autoconf macros.
* configure.ac: Incremented version to 1.7.2.
* arp-fingerprint get-iab get-oui: Replaced "#!/usr/bin/perl" shebang
with "#!/usr/bin/env perl" to increase portability. This allows
these perl scripts to work on systems where perl is not installed in
/usr/bin, such as NetBSD.
* configure.ac: Incremented version to 1.7.1.
* arp-fingerprint: Added NetBSD 4.0, FreeBSD 7.0 and Vista SP1
* Released arp-scan version 1.7.
tarball arp-scan-1.7.tar.gz, size 344,771 bytes
md5sum a9927dba2b1dbdfd1c3b3bb09615fc14
* ieee-oui.txt, ieee-iab.txt: Updated IEEE OUI and IAB listings from
IEEE website using get-oui and get-iab Perl scripts.
* configure.ac: Incremented version to 1.7.
* arp-scan.a: Removed reference to RMIF environment variable.
arp-scan now uses the value specified with --interface, or
if that is not specified, picks an interface with
pcap_lookupdev().
* configure.ac: Incremented version to 1.6.4 for pre-release
testing.
* *.c, *.h: Modified copyright statements to read 2005-2008.
* arp-scan.c: Added --pcapsavefile (-W) option to allow received
ARP responses to be saved in the specified pcap savefile for
later analysis.
* TODO: Removed plan to support libpcap 0.7 as just about every
system has at least libpcap 0.8, and most have 0.9.
* arp-scan.c: changed display_packet() so it displays the source
address from the frame header in parens if it is different from the
ar$sha address. E.g.
192.168.1.255 ff:ff:ff:ff:ff:ff (00:03:a0:88:eb:a8) Broadcast
* arp-scan.c: Change most calls to strtol() to use the new
wrapper function Strtol() instead, because this checks for
errors. Previously, a non-numeric value would be converted to
zero without any error, meaning something like "--snap=xxx"
would be silently accepted. Now such invalid inputs results in
an error.
* arp-scan.c: Added new --vlan (-Q) option to support sending
ARP packets with an 802.1Q VLAN tag. Response packets with
an 802.1Q tag are decoded and displayed irrespective of this
option.
* arp-scan.h: Reduced MAX_FRAME from 65536 to 2048 bytes.
* arp-scan.c: Add the optional padding in marshal_arp_pkt(), and
avoid potential buffer overflow if padding is longer than the
remaining buffer size.
* arp-scan.c: Changed display_packet() to take ARP structure, extra
data and framing type as parameters passed from callback() to avoid
having to call unmarshal_arp_pkt() twice. This also means that
we don't need to pass the raw frame to display_packet() now as it
has the data in individual variables.
* arp-scan.c: Move padding addition to marshal_arp_pkt().
* arp-scan.h, arp-scan.c: Changed MAXIP to MAX_FRAME and changed value
to 65536 bytes. This is the maximum allowable frame size, which is
used to size read/write buffers. This is much larger than any
layer-2 frame.
* arp-scan.h: Changed PACKET_OVERHEAD to 18 (6+6+2 ... +4) and
MINIMUM_FRAME_SIZE to 46.
* arp-scan.h: undefine SYSLOG, as we don't use this any more, and I
doubt that anyone else needs it. The syslog functionality may be
removed in a future release.
* arp-scan.c: Added support for RFC 1042 LLC/SNAP framing with the
new --llc (-L) option. | Stéphane COLIN | 2011-08-02 11:00 UTC |
Comments:
There have been no comments so far.
Comments:
You must be logged in to make comments.